Darrieus Engineering Notebook
Vertical-Axis Wind Turbine & Generator Research
Swipe across the steps to see the complete notebook roadmap →
Your selected rotor drawing, blade-set price and essential build checks in one place.
Review your Step 01 rotor and blade-set estimate, then copy your selected details into an email to Warlock Engineering.
Short reminders, not a workshop design.
Size the bearings and structure for rotor weight, bending, fatigue and high-wind loads. Independent support may be necessary.
Identify which generator member rotates. Confirm shaft, hub, bolt pattern and allowable bearing loads before designing any coupling.
Document clearances, fasteners, corrosion protection, vibration and balancing. Avoid assumptions from an illustrative drawing.
Inspect the assembly and verify loads, overspeed response and stopping provisions. Step 05 braking curves do not certify a stopping system.
HOLD — not for fabrication or unattended operation. No shaft coupling, bearing arrangement, mounting bolt pattern, structural load rating or storm survival has been approved by this Notebook.
Read-only Step 01 and Step 03 choices; no design settings changed.
—
Illustrative blade-set estimate calculated from the selected geometry.
—
The supplier quote is a USD reference, not an Australian retail price.
View data & supplier quote ↗Choose the parts you want quoted, then add delivery details to request freight and lead time.
Freight depends on your delivery address. Lead time is often around three months, but can be shorter or longer; Warlock will confirm both by email.
Select the text, copy it and paste it into your own email client. Nothing is sent or stored by this form.
Generator supplier figures are base quotes in USD with an approximate AUD conversion where available. Blade-set prices are illustrative AUD estimates. Freight, taxes and lead times must be confirmed separately.